ContractBeam
The Registry

Browse opportunities

researchType: contractSource: SAM.govclear all
ContractNo Set aside used1 day left

Notice of Intent: Storage and distribution services for 438.75 cu ft of paper research and pathology reports; and 1,670.12 cu ft of pathology paraffin embedded tissue blocks and tissue fixed slides used in the Laboratory of Pathology, CCR, NCI.

THIS IS A NOTICE OF INTENT AND NOT A REQUEST FOR QUOTATIONS. This notice is published in accordance with Federal Acquisition Regulation (FAR) 5.101(a)(1) requiring the dissemination of information regarding proposed contract actions. This is a Notice of Intent to award a sole source, firm-fixed price purchase order under the authority of 41 U.S.C. 3304(a)(1), as implemented by FAR 12.102 and 6.302-1 - Only One Responsible Source and No Other Supplies or Service Will Satisfy Agency Requirements and is not a request for competitive proposals. POP: 08/01/2026 to 07/31/2027 Option 1: Aug. 2027 – July. 2028 Option 2: Aug. 2028 – July. 2029 Option 3: Aug. 2029 – July. 2030 Option 4: Aug. 2030 – July. 2031 The National Institute of Health (NIH) Laboratory of Pathology intend to negotiate on a sole source basis with EPL Archives LLC on an other than full and open competition basis. The Laboratory of Pathology provides diagnostic services for the Clinical Center at the National Institutes of Health. The department provides pathological diagnosis of specimens submitted incidental to standard care and clinical investigation of National Institutes of Health patients and submitted by outside health organizations. As a result of our clinical and research missions, pathology blocks, slides, images, and hardcopy patient reports must be stored and available indefinitely. LP must continue to store a certain portion of these patient materials offsite due to space limitations in building 10. LP currently archives 438.75 cubic feet (351 boxes) of research documents and clinical patient records; 1,670.12 cubic feet of paraffin embedded pathology tissue blocks, and stained slides dating back to the 1980’s that are still requested for recruits and reviewed by clinical and research staff. EPL Archives facilities are environmentally controlled and protected against hazards, and the company provides GLP-compliant archive services and is the only storage facility we’ve utilized for archiving and all our materials are presently located there. LP has now been relocated as of July 2015; the onsite high-density storage facility has been renovated but is inadequate space for what has been stored offsite to remedy the storage problem. It would be beneficial to keep the materials where they’re stored now unless there’s a newer facility closer to the NIH Campus to make it cost effective to move all the materials. As archived material is needed, EPL provides a one-day turnaround to provide us with our necessary reports or slides, which ensures adequate turnaround times for LP’s services provided to our NIH researchers and clinicians. In addition, LP’s material has been stored at EPL for over a decade, and it would be unfeasible to move to another facility due to the potential cost it would take to package, inventory, and transport to another facility, but we understand to find out, it must be advertised. Justification: 1. All Contractor employees who handle Material(s) shall be trained in cGMP regulations and in the specific standard operating procedures for their activities. All Contractor employees who maintain government’s Material(s) shall be trained and acknowledge compliance with the HIPAA and Privacy Act. Contractor shall provide evidence that personnel are qualified to handle the government’s Material(s) and have been trained and acknowledge compliance with adherence to the laws that govern patient privacy. Contractor will maintain written records (inventory and transaction records) on each Deposit Materials consisting of correspondence between Contractor and the Depositor, information provided by Depositor on the type of material included in the Deposit Material and designation of Depositor’s ownership of the Deposit Materials. Depositor may review these records with respect to the Deposit materials, with the exception of locator codes, and copies may be obtained, or originals …

AgencyHEALTH AND HUMAN SERVICES, DEPARTMENT OF
NAICS561990
PlaceSterling, VA
SAM.gov· Posted Jul 29, 2026#NOI-PCA-NCI-08437
ContractNo Set aside used4 days left

LSM990 Confocal Airyscan2 System

This notice is to update FAR clauses and the attachment. There are no other changes to this notice. 1 GENERAL INFORMATION This is a combined synopsis/solicitation for commercial products prepared in accordance with the Far Part 12 as supplemented with additional information included in this notice, and in conjunction Far 8.402(f). This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation will not be issued. The National Institutes of Health (NIH), National Institute on Deafness and Other Communication Disorders (NIDCD), Intends to contract on a sole source basis with Carl Zeiss Microscopy – One North Broadway, White Plains, NY 10601 to procure a LSM 990 w/Airyscan-2 Microscope consisting of all the items per the attachment provided in this notice. The Government intends to award a Firm-Fixed-Price Purchase Order resulting from this solicitation. 2. DESCRIPTION OF REQUIREMENT 2.1 Background The NIDCD relies on high-resolution microscopy to image mouse inner ear tissues and to perform live imaging of cellular organelle development and function in zebrafish. The LSM990, equipped with the proprietary Airyscan 2 detector, provides the spatial resolution and sensitivity required to visualize subcellular structures that cannot be adequately resolved with conventional confocal microscopy. The 32-channel GaAsP detector array achieves resolution of approximately 90 nm in the lateral dimension and 200 nm in the axial dimension while simultaneously improving signal collection efficiency. The enhanced sensitivity of the Airyscan 2 detector allows imaging at lower laser powers, reducing photobleaching and phototoxicity during long-term live imaging experiments. This combination of high resolution and gentle imaging is essential for studying dynamic cellular processes in living tissues. In addition, the LSM990 offers substantial improvements in data handling compared with the older LSM780, generating raw datasets that are approximately eight-fold smaller and enabling Airyscan image processing that is up to five-fold faster. These advances improve both experimental throughput and data management for high-resolution live imaging studies. The Zeiss LSM 990 with Airyscan 2 enables gentle, high-sensitivity imaging of both live and fixed samples, including fine structures in the mouse inner ear and zebrafish lateral line. The Airyscan 2 detector array improves signal detection and spatial resolution while allowing imaging at low laser power, thereby minimizing photobleaching and phototoxicity. The Labs’ current Zeiss LSM780 confocal system is heavily used by researchers from three NIDCD laboratories and is no longer covered by a service contract, with many replacement parts no longer available. Zeiss ZEN software is user-friendly and intuitive, allowing new users to become proficient quickly. Because the LSM990 operates on the latest version of the same software platform, it will provide a seamless transition while ensuring reliable, faster, higher-quality, and more efficient image acquisition for the many NIDCD investigators who depend on this system. Overall, the Zeiss LSM 990 will provide essential imaging capabilities and meet current and future microscopy needs at NIDCD. Brand Name Only: Sole Source Authority - 12.102(b) for Open Market and 8.405-6 for GSA items The Airyscan detector of LSM990 system represents a proprietary technology from Carl Zeiss Microscopy, LLC and a continuation of Airyscan detector use in the lab is essential to generate high-resolution publication quality data and efficiently complete the research projects that are ongoing in the lab using this detector, only Zeiss LSM990 system would suffice the goal. 3. DELIVERY / PLACE OF PERFORMANCE Delivery, installation, re-alignment and recalibration once the microscope systems have been added to its permanent location in the lab. National Institutes of Health 9000 Rockville Pike Building 35A, Room 1D-9…

AgencyHEALTH AND HUMAN SERVICES, DEPARTMENT OF
NAICS334516
PlaceBethesda, MD
SAM.gov· Posted Jul 29, 2026#75N98026Q00888
Contract2 days left

NSN: 2840-01-374-0735NZ, P/N: 4080513, NOUN: SUPPORT, AUGMENTER PR FD2030-25-00159

Estimated issue date 08/04/2026 and estimated closing/response date 09/03/2026. 2. RFP #: SPRTA1-26-R-0386 3. PR#: FD2030-25-00159 4. Nomenclature/Noun: Augmenter Support 5. NSN: 2840-01-374-0735NZ 6. PN: 4080513 7. Application (Engine or Aircraft): F-100 Engine 8. Acquisition Method Code (AMC): 1/C 9. Description: Nozzle Assy provides the support for installing actuators, sync rings and other hardware to operate the nozzle assy. 10. Material: Titanium Alloy 11. Quantity: LINE ITEM OOO1: 32 each BEQ: 32 each, Min: 9 each, Med: 34 each, Max: 51 each LINE ITEM 0002: 2 EA First Article (Production) LINE ITEM 0003: 1 EA First Article (Expended) LINE ITEM 0004: 1 LT (First Article Test Plan) LINE ITEM 0005: 1 LT (First Article Test Report) 12. Qualified Sources: Barnes Group (32317), RTX Corp (52661/77445) Jedco Inc. (64289) 13. Mandatory Language: Electronic procedures will be used for this solicitation. Only written or faxed request received directly from the requestors are acceptable. Note: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (385)-591-1672. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. 14. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. One or more of the items under this acquisition is subject to Free Trade Agreements. 15. Based upon market research, the Government is not using the policies contained in Far Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice. 16. Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirements at time of award, in accordance with FAR Clause 52.209-1 or 52.209-2. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation. 17. Export Control does apply. 18. The solicitation will be available for download on the release date from sam.gov. No telephone requests. Questions concerning this synopsis or subsequent solicitation can be directed to Alex Varughese at (385) 591- 0709 or email alex.varughese.1@us.af.mil

AgencyDEPT OF DEFENSE
NAICS336412
SAM.gov· Posted Jul 30, 2026#SPRTA1-26-R-0386
Contract3 days left

NIIN: 016826213/ NOMEN: WHEEL ASSEMBLY, AIRC

NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis with Sikorsky for the procurement of the following FMS requirement: «WHEEL ASSEMBLY,AIRC», P/N: «06250-12801-044», NSN: «1RD 1630 016826213 H5», QTY: «4», NAICS: «336413», FSC: «1630» There are no drawings/data available. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 3204(a)(1) as supplemented by FAR 6.302. Source Approval Statement applies to NSN(s). These item(s) are being synopsized as a sole source procurement to Sikorsky, as the Agency anticipates receiving a single acceptable offer from this source. It is expected that award will be issued under the existing Basic Ordering Agreement (BOA) N00383-26-G-P401. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation and will be posted to NECO. No telephone requests will be honored and no hard copies will be mailed out. Interested organizations may submit their capabilities and qualifications to perform the effort by email at kate.n.schalck.civ@us.navy.mil.

AgencyDEPT OF DEFENSE
NAICS336413
SAM.gov· Posted Jul 30, 2026#N00383-26-Q-FA73
ContractSmall Business Set Aside - Total1 day left

Homeland Security Cutter - Light Icebreaker (HSC-L) Solicitation

The United States Coast Guard (USCG) is issuing Request for Proposals (RFP) No. 70Z02326R93280004 for the Homeland Security Cutter - Light Icebreaker (HSC-L) acquisition. The Government intends to award an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for the design, production, testing, delivery, and related supplies and services for HSC-L vessels in accordance with the solicitation. This solicitation uses a two-phase advisory down-select process. Phase 1 proposals are due by the date and time stated in this notice and the solicitation. Following Phase 1 evaluations, the Government intends to issue advisory down-select notices to offerors in accordance with Section L of the solicitation. Phase 2 proposal due dates will be included in a subsequent solicitation amendment. Offerors shall review and comply with all requirements, instructions, terms, conditions, provisions, clauses, and attachments included in the solicitation. The complete solicitation, including the SF-33, Sections B through M, and all applicable attachments, is provided below under the Attachments/Links section of this notice. All questions and proposal submissions shall be made in accordance with the instructions provided in the solicitation. -------------------------------- Amendment A00001 -------------------------------- Amendment A00001 is issued to extend the Phase 1 proposal submission deadline, provide the Government’s responses to solicitation questions, revise Sections L and M to clarify that the General Arrangement Drawing will be provided as part of Phase 2 with the Contract Design package and is not provided with the Phase 1 Design Placemat, revise Attachment J-2, Design and Readiness Review Requirements and Criteria, and revise Section I, FAR 52.211-11, Liquidated Damages-Supplies, Services, or Research and Development. Phase 1 proposals are now due no later than 12:00 PM U.S. Eastern Time on July 20, 2026. Except as expressly modified by Amendment A00001, all other terms and conditions remain unchanged. Offerors are responsible for reviewing Amendment A00001 and all associated attachments in their entirety and shall acknowledge receipt of the amendment in accordance with the solicitation instructions. -------------------------------- Amendment A00002 -------------------------------- Amendment A00002 is issued to provide the Government’s responses to additional solicitation questions; revise Section C.2.3(e) to correct the typographical error “foreign contactors” to read “foreign contractors”; revise Section M.2.1 and the applicable Factor 1 confidence rating definitions to clarify the evaluation of in-house and subcontracted or teaming-partner design and engineering resources; provide clarification regarding the meaning of concurrent production; revise Sections L.11 and M.2.2 to update the Phase 1 due-date references used for determining recent past performance from July 14, 2026, to July 20, 2026, consistent with Amendment A00001; and issue a conformed solicitation incorporating Amendments A00001 and A00002. The clarification regarding concurrent production is provided through the Government’s response to the applicable solicitation question. Sections L and M are not revised in connection with that clarification. The Phase 1 proposal submission deadline remains unchanged. Phase 1 proposals are due no later than 12:00 PM U.S. Eastern Time on July 20, 2026 . Except as expressly modified by Amendment A00002, all other terms and conditions remain unchanged. Offerors are responsible for reviewing Amendment A00002 and all associated attachments in their entirety and shall acknowledge receipt of the amendment in accordance with the solicitation instructions. -------------------------------- Amendment A00003 -------------------------------- The U.S. Coast Guard hereby issues Amendment A00003 to RFP No. 70Z02326R93280004 for the Homeland Security Cutter – Light Icebreaker (HSC-L) acquisition. Ame…

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS336611
SAM.gov· Posted Jul 28, 2026#70Z02326R93280004
Contract1 day left

ORNL High Flux Isotope Reactor GP-SANS Polarizer

AMENDMENT 02: Extends Date Offers Due to 08/03/2026. The High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) is a high-flux research reactor that, in addition to isotope production, serves as a steady-state neutron source for a suite of neutron scattering instruments. Among these, the General-Purpose Small-Angle Neutron Scattering (GP-SANS) instrument is being upgraded to incorporate incident beam polarization capabilities. This enhancement will enable spin-resolved SANS measurements, allowing for the separation of nuclear and magnetic scattering components and facilitating studies of magnetic order, spin textures, and correlated spin structures. A critical component of this upgrade is the integration of a polarizing cavity, which utilizes magnetized supermirrors or transmission-based polarizers to produce a beam of neutrons in a well-defined spin state prior to their interaction with the sample. This capability is essential for conducting polarization analysis and advanced techniques such as polarization contrast measurements and vector-magnetic SANS. This specification defines requirements for materials of construction, fabrication, inspection, and delivery to the Company of a complete polarizing cavity and magnetic housing assembly. The polarizing cavity and magnetic housing assembly shall be installed at the GP-SANS instrument.

AgencyENERGY, DEPARTMENT OF
NAICS334516
PlaceOak Ridge, TN
SAM.gov· Posted Jul 14, 2026#PR449089