ContractBeam
The Registry

Browse opportunities

22 opportunities · showing 1–20

Active only
For youRelevanceClosing soonNewestHighest value
“engineering OR technical”✕Set-aside: No Set aside used✕clear all
ContractNo Set aside used3 days left

MICROWAVE TUBE ENGINEERING SERVICE

N00164-26-Q-0254 – SOLE SOURCE –MICROWAVE TUBE ENGINEERING SERVICE– FSC R425- NAICS 541330 ISSUE DATE 29 JULY 2026 – CLOSING DATE 5 AUGUST 2026 – 12:00 PM Eastern Time ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for the engineering support and gold tube testing of microwave tubes. The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, CPI Electron Device Business, under the authority of FAR 13.106-1. This is being sole sourced because these items already exist in the customer’s program and have been ingratiated into their system. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov. This solicitation is being issued pursuant to the procedures at FAR Part 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-26-Q-0254 is hereby issued as an attachment hereto. Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Offers shall be e-mailed to cassidy.k.shaw.civ@us.navy.mil . All required information must be received on or before ___ 5 AUGUST 2026, 12:00 PM ____ EASTERN TIME.

AgencyDEPT OF DEFENSE
NAICS541330 · Engineering Services
PlaceCrane, IN
SAM.gov· Posted Jul 29, 2026#N0016426Q0254
ContractNo Set aside used1 day left

Procurement of Bushing, Flanged

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QJ0000308 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250. This is an unrestricted requirement. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following item: Nomenclature: Bushing, Flanged National Stock Number (NSN): 3120-00-321-9226 Part Number (P/N): M81934/2-12A018 Quantity: Twenty (20) each *Optional Quantity: Forty (40) each Requested Delivery Date: 08/31/2026 At the time of award, the USCG intends to place an order for a quantity of twenty (20) items. IAW Federal Acquisition Regulation (FAR) 52.217-6 the USCG may require an additional quantity of forty (40) items for a maximum quantity of sixty (60) items at the same price and lead time as the original order, for up to three hundred and sixty-five (365) days after the initial award date. ***Please note that if the USCG chooses to exercise any optional quantity modifications, such modifications will be issued unilaterally to the contractor. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. All parts shall be NEW approved parts. “New Surplus” will be considered with traceability to the OEM and approval from Medium Range Recovery (MRR) Engineering. If quoting new surplus items, photos of packaging and/or items MUST be included with the quotation for Engineering review. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Please carefully review the following attachment for additional information and requirements: ATTACHMENT 1 - “TERMS AND CONDITIONS – 70Z03826QJ0000308” FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 8/3/2026 at 10:00 a.m. Eastern Daylight Time (EDT). Anticipated award date is on or about 8/5/2026. E-mail quotations may be sent to Austin.R.Ivins@uscg.mil and MRR-PROCUREMENT@uscg.mil. Please indicate 70Z03826QJ0000308 in the subject line.

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS336413
SAM.gov· Posted Jul 29, 2026#70Z03826QJ0000308
ContractNo Set aside used2 days left

Volkswagen Caddy Life – Brand Name or Equal

Volkswagen Caddy Life – Brand Name or Equal Standard Specifications Summary Import Requirement: Any vehicle imported must meet all applicable EU type-approval standards and Danish national registration/import requirements (SKAT vehicle registration, Danish Motor Vehicle Inspection (Færdselsstyrelsen) compliance, emissions conformity, and applicable registration tax rules) prior to import and titling in Denmark. Powertrain 1.5 TSI OPF (mild hybrid) petrol engine — 116 hp / 85 kW Front-Wheel Drive (FWD) 6-speed DSG dual-clutch automatic transmission 2,755 mm wheelbase (standard-length body) Doors & Seating Twin sliding side doors for easy access to both rows Height-adjustable driver's seat with lumbar adjustment Under-seat storage drawers, front Rear bench seating with reclining backrests Exterior 16-in. alloy wheels LED rear tail lights Roof rails Heated, electrically adjustable door mirrors Interior & Technology Touchscreen infotainment display with App-Connect (Apple CarPlay/Android Auto) Digital Cockpit instrument cluster Leather multifunction steering wheel Keyless entry/start (Keyless Go) Cruise control with speed limiter Safety Front and rear parking sensors Rear-view camera Electronic Stability Control (ESC) and Anti-lock Braking System (ABS) Front Assist with City Emergency Braking The vendor is required to submit a duty- and tax-free quote including shipping, registration fees, and warranty details. The vehicle is required to meet or exceed EU/Danish road worthiness requirements. The contract will be a firm fixed priced contract. Note: US-made vehicles and Danish-made vehicles differ primarily in regulatory compliance and market preferences. US vehicles are built to meet American standards, which include specific lighting requirements such as amber turn signals and sealed-beam headlights, as well as odometers that measure in miles. In contrast, Danish vehicles adhere to European Union regulations, featuring E-marked lighting with rear fog lights and metric odometers in kilometers. Additionally, European emission standards for Danish cars are generally stricter, influencing engine design and fuel efficiency. Design and safety features may also differ to cater to local preferences and driving conditions in each market. Offers are due by Tuesday, August 4, 2026 at 11:00 AM (local time). For more detailed information, please contact: Copenhagen Procurement Team Phone: +45 3341 7100 E-mail: CopenhagenProcurement@state.gov IMPORTANT! For proposals exceeding $40,000 USD (or the equivalent in local currency): Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submittal of their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.

AgencySTATE, DEPARTMENT OF
NAICS33611
PlaceCopenhagen
SAM.gov· Posted Jul 9, 2026#PR16121823
ContractNo Set aside used3 days left

MTU 6V92 Overhaul & Repair Services

This notice is revised to include Amendment 002, extension of offers from 31 July 2026, 2:00pm EST to 5 August 2026, 5:00pm EST. Combined Synopsis/Solicitation for the overhaul of MTU 6V92 marine engines installed on the 47’ Motor Lifeboat (MLB) on a brand name basis. Only authorized Original Equipment Manufacturer (OEM) repair facilities using OEM parts may respond. Attachments: 6V92 70Z04026Q51502B00 CSS 5.28.26 6V92 70Z04026Q51502B00 Schedule 6.2.26 6V92 OVHL SPEC_22_Oct_25 SF-30 70Z04026Q51502B00 Amentment 001 70Z04026Q51502B00 Questions and Answers SF-30 70Z04026Q51502B00 Amentment 002

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS811310 · Industrial Machinery Repair & Maintenance
PlaceCurtis Bay, MD
SAM.gov· Posted Jul 31, 2026#70Z04026Q51502B00
ContractNo Set aside used1 day left

Replacement UTVs Needed for the Mark Twain N.F. With Trade-Ins

The Government is seeking a Can-Am Defender HD11 or equivalent utility task vehicle. To establish an acceptable baseline for an "equivalent" submission, the Government will also accept quotes for the Polaris XD1500 North Star Edition or its equivalent. Salient Characteristics •Sealed Cab with HVAC to protect occupants from exterior elements such as smoke, insects, and harsh weather •Triple Cylinder Engine displacement of at least 999cc’s with at least 95HP •CVT transmission with electronic drive belt protection •Must have Electronic Power Steering •Drivetrain must have turf mode to protect sensitive areas and locking front differential for maximum traction in demanding conditions •Box capacity of 1000 lbs. for carrying fire apparatus •Cargo box at least 38”L x 54” W x 12” D •Ground clearance of at least 14” •At least 29” tires •Full coverage heavy duty HMW plastic skid plate • Towing capacity of 2500 lbs. from 2” receiver •Payload capacity of at least 1,200 lbs. •Ability to seat at least 3 personnel •At least 12” of suspension travel front and rear with arched A-arms for additional clearance. •Fuel capacity of at least 11.9 gallons •At least 4,500-pound winch •Full Windshield with wiper The contractor must accept three (3) used UTVs as trade-ins as a mandatory condition for this award. The vendor will apply the trade-in value as a credit to lower the final purchase price of the new Can-Am UTVs. EN8307 2020 Kawasaki Mule Pro FX LE VIN: JKBAFSC19LB517265 Hours: 590 / Mileage: 2959 EN1995 2016 Kubota RTV-X1120D Serial-A5KF1GDBPEG013450 138.2 Hours EN2034-907 2017 Kawasaki Mule Serial-JK1AFCM11JB525690 136.5 Hrs.

AgencyAGRICULTURE, DEPARTMENT OF
NAICS441227
PlaceRolla, MO
SAM.gov· Posted Jul 30, 2026#12444526Q0054
ContractNo Set aside used1 day left

STANDARDIZED ELECTRONIC MODULE

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 5963-01-575-9918 ITEM NAME: ELECTRONIC MODULE, STANDARDIZED OEM PN: 60173-370 MFG: DYNALEC CORP QTY: 10 EA DESCRIPTIVE/SPEC DATA: 250 WATT AMPLIFIER MODULE (A19-A24 ASSEMBLIES, 6 EACH). PART OF SHIPBOARD ANNOUNCING SYSTEM MUST BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10 AND MARKED IAW MIL-STD-129R. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR-CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. IF VENDORS CANNOT INDIVIDUALLY PACKAGE, PACK, MARK AND BAR-CODE AS REQUIRED, VENDORS MAY USE A THIRD PARTY TO PACKAGE ITEMS AS REQUIRED IF NECESSARY. PROVIDE ADDITIONAL COST WITH QUOTATION. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED WILL NOT BE RECIEVED BY THE WAREHOUSE AND WILL NOT BE ACCEPTABLE *****DO NOT SUBMIT QUOTE IF YOU CANNOT MEET THE PACKAGING REQUIREMENTS WITHIN THIS SOLICITATION. STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE - IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. ***** Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2025-05 (Oct 1, 2025) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for this solicitation is 334419 and the business size standard is 700. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. Award will be lowest price technically acceptable. The Coast Guard intends to award a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is August 3, 2026, at 10:00 am Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Sep 2023); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Oct 2025) with Alternate I, Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following F…

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS334419
SAM.gov· Posted Jul 29, 2026#70Z08026Q20897B00
ContractNo Set aside used3 days left

Amendment 0001 - RFQ 19KU2026Q0009 - USAGM-Fence Cleaning Services

Subject: Request for Quotations number RFQ 19KU2026Q0009 - USAGM-Fence Cleaning Services Enclosed is a Request for Quotations (RFQ) for the USAGM-Fence Cleaning Services. If you would like to submit a quotation, follow all solicitation instructions, and complete the required portions of the attached document. This solicitation is issued under FAR Part 12, Acquisition of Commercial Products and Commercial Services. A site visit has been scheduled for July 23, 2026, at 8:00 AM Kuwait local time. For more information, please refer to page 33. Interested contractors are strongly encouraged to attend the scheduled site visit to inspect the premises prior to finalizing their proposals. It is the contractor’s sole responsibility to thoroughly assess the site during this visit. Any inaccuracies, omissions, or cost discrepancies in the submitted proposal resulting from failure to inspect the site shall be the contractor’s full responsibility . The U.S. Government intends to award a contract/purchase order for one year with two one-year option to the responsible company submitting a technically acceptable offer at the lowest price. The Government intends to evaluate and award without discussions but reserves the right to conduct discussions in accordance with FAR 12.203 and 12.204 if determined to be in the Government’s best interest. Note: Prospective offerors are strongly encouraged, though not required, to register in the System for Award Management (SAM) at https://www.sam.gov. Offerors with an active SAM registration need only provide their Unique Entity Identifier (UEI) number and are not required to complete the information 52.204-90 since relevant information is found in their SAM registration. Offerors without an active SAM registration must complete FAR 52.204-90, Offeror Identification, in Section 5, Representations and Certifications. This information must be updated annually if option years are included in the solicitation or award. Offerors are strongly encouraged to maintain an active SAM account For a quotation to be considered, you must also complete and submit the following: SF-1449 (12, 17a, 24, 30a, 30b and 30c) Section 1, Pricing Section 5, Representations and Certifications Additional information as required in Section 3 and/or in the solicitation Proof of SAM Registration / Unique Entity ID, or if not SAM registered, complete FAR 52.204-90, Offeror Identification, Failure to follow these instructions will render the offer non-compliant and ineligible for further consideration Any questions regarding the RFQ to be submitting electronically to Kuwait_Solicitation@state.gov no later than July 27, 2026, at 10:00 am . No questions will be accepted beyond this date. Please enter the title of your email as “ Questions – RFQ 19KU2026Q0009 - USAGM-Fence Cleaning Services Submit your quote electronically by email to Kuwait_Solicitation@state.gov. Quotations are due by August 5, 2026, at 10:00 am Kuwait local time. No quotes will be accepted after this time. Please enter the title of your email as “Quote – RFQ 19KU2026Q0009 - USAGM-Fence Cleaning Services ------------------------------------------------------------------------------------------------------------------------------ The purpose of this amendment is to correct typographical and administrative errors in the issued RFQ. No other terms or conditions of the solicitation are changed. The following corrections are hereby made: Page 1 – Cover Letter: Paragraph 4 is revised to state: "The U.S. Government intends to award a contract/purchase order for a one-year base period with four (4) one-year option periods," in lieu of "one year with two-year option periods." Page 4 – SF-1449, CLIN 0001: CLIN 0001 is revised to identify the line item as the Base Year. Page 5 – SF-1449, Item 19: The CLIN references for the option periods are corrected as follows: CLIN 0002 – Option Year 1 CLIN 0003 – Option Year …

AgencySTATE, DEPARTMENT OF
NAICS561790
PlaceKW-HA
SAM.gov· Posted Jul 26, 2026#19KU2026Q0009
ContractNo Set aside used1 day left

SLEEVE, FWD, LINE & SLEEVE, AFT, LINE

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following parts: Item 1) NSN: 2010-01-187-1763 SLEEVE, FWD, LINE MATERIAL: COPPER NICKEL, ALLOY SEE ATTACHED FOR DETAILS, WORK ITEM 1: 2010-01-187-1763, SLEEVE FWD LINE SHAFT, PURCHASE. 210 WMEC B CLASS PROPULSION LINE SHAFT 627-WMEC-243-006 PIECE 2. EACH ITEM MUST BE INDIVIDUALLY PACKAGED & MARKED MFG: UNITED STATES COAST GUARD PN: 620WPC-4301-55-BA2 QTY: 4 EA Item 2) NSN: 2010-01-094-8938 SLEEVE, AFT, LINE MATERIAL: COPPER NICKEL, ALLOY SAE NO. C96400, AS PER SPEC ASTM-B-369-09; I.D. SHALL BE CONCENTRIC WITH O.D. THROUGHOUT THE LENGTH OF SLEEVES WITH A TOLERANCE OF +/- .0025 IN.;AFTER FINISHING I.D. SLEEVES SHALL BE HYDROSTADICALLY TESTED WITH CLEAN FRESH WATER TO 50 P.S.I.FOR 10 MINUTES MINIMUM TO INSURE NO LEAKAGE. 210 WMEC B CLASS PROPULSION LINE SHAFT (INTERMEDIATE) STERN TUBE SHAFT SLEEVE. DWG 627-WMEC-243-006 PIECE 3. DESCRIPTION: P/N: 620 WPC-4301-55-B PIECE 3 "2010-01-094-8938", ROUGH MACHINED - CYLINDRICAL, 375.02 LBS/EA MATERIAL SPEC: ASTM-B-369-09, C96400 METAL: CN7030 DIMENSIONS: 10.100" OD(+0.050" -0.000") X 8.140" ID(+0.000" - 0.020") X 41.500" OAL(+0.250" -0.000") INCLUDES: CERT REPORT WITH ALL DOCUMENTATION, CHEMISTRY TEST, MECHANICALS TEST, HYDROSTATIC PRESSURE TEST, PART MARKING & PKG MARKING PACKAGE INDIVIDUALLY IAW MIL-STD-2073-1E, MARKING IAW MIL-STD-129R MFG: UNITED STATES COAST GUARD PN: 620WPC-4301-55-B PIECE 3 QTY: 2 EA ALL ITEM TO BE INDIVIDUALLY PACKAGED IAW MIL-STD-2073-1E AND MARK IAW MIL-STD-129R. BAR CODING REQUIRED *****STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE, IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. ***** Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2026-01 (Mar 13, 2026) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for this solicitation is 333998 and the business size standard is 500. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. The award will be made based on the lowest price technically acceptable. The Coast Guard intends to award a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number with their offer. The closing date and time for receipt of quote is Aug 3, 2026, at 10:00 AM Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of t…

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS333998
SAM.gov· Posted Jul 25, 2026#70Z08026QAF144
ContractNo Set aside used2 days left

Basic Military Training (BMT), Dining and Classroom Facility (DCF) 4

***AM#0001, issued 02JUL26*** The U.S. Army Corps of Engineers (USACE) has been tasked with soliciting and awarding the Design-Bid-Build contract for the Basic Military Training, Dining and Classroom Facility #4. The Construction project consists of a multi-story facility with a drilled pier foundation, concrete floor slabs, structural steel framing, masonry walls, a standing seam metal roof system, and an elevator. The facility will include a kitchen, dining areas, and multiple classrooms for the residents of two Airmen Training Complexes. The project will also include all site improvements, utilities, pavements, communications systems, and other necessary work to provide a complete and fully operational facility. Environmental remediation and site preparation activities will be performed as required, including asbestos removal, and any additional work needed to mitigate potential hazard. Facility will be designed as permanent construction in accordance with Department of Defense Unified Facilities Criteria 1-200-01, General Building requirements.

AgencyDEPT OF DEFENSE
NAICS236220 · Commercial & Institutional Building Construction
PlaceDWG, TX
SAM.gov· Posted Jul 10, 2026#W9126G26RA028
ContractNo Set aside used1 day left

Oxygen Monitor, Acft

Synopsis PR: FD2030-26-00218 1. Estimated issue date and estimated closing/response date: Issue: June 15, 2026 Closes: July 15, 2026 2. RFP# SPRTA1-26-R-0312 Request for Proposal 3. Service/Spare/Repair/OH: Spares 4. AMC: 1/C 5. Nomenclature/Noun: Oxygen Monitor, Acft 6. NSN: 1660-01-473-3548 7. PN: 16VK058-2, 3270074-0201 8. History: 28 Oct 2025, 6 each, Lockheed Martin Corporation (81755) 06 Jan 2025, 2 each, Lockheed Martin Corporation (81755) 9. Description/Function: Oxygen Monitor, Acft. DIMENSIONS, 5.0 INCH (L) BY 3.0 INCH (W) BY 2.5 INCH (H). WEIGHT, 2 POUNDS (LB). MATERIAL CONTENT, ALUMINUM. MEASURES THE OXYGEN CON- CENTRATION OF THE CONCENTRATOR PRODUCT GAS. APPL. F-16C ACFT. 10. Total Line Item Quantity: L/I 0001 60 Each (Range: 13-71) L/I 0002 1 Lot (Production Surge Plan) 11. Application (Engine or Aircraft): F-16 12. Destination: Ship to SW3211, Tinker AFB, OK 13. Required Delivery: L/I 0001 On or Before 16 SEP 2026 L/I 0002 30 Days After Contract Award IAW CDRL 14. Qualification Requirements: Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item. 15. Export Control Requirements: Yes 16. UID: UID requirements will apply. 17. Qualified Sources: Lockheed Martin Corporation (81755) Mission Systems Davenport Inc (99251) 18. Set-aside: This acquisition will not be set aside. 19. Surplus: Surplus is not authorized. 20. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data. In accordance with FAR 5.207(c) (16) (i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contract with the firms(s) listed. This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small business set aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors). Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type o…

AgencyDEPT OF DEFENSE
NAICS336413
SAM.gov· Posted Jul 2, 2026#SPRTA1-26-R-0312