ContractBeam
The Registry

Browse opportunities

security OR guard OR defenseSet-aside: Total Small Business Set-Aside (FAR 19.5)clear all
ContractTotal Small Business Set-Aside (FAR 19.5)2 days left

Electrical and Comm/Lan

This requirement is for non-personal services to deliver electrical and communications cabling and equipment to modernize Bldg 1900 East, Room 268 at Scott AFB. The contractor will disconnect existing power for 13 legacy workstations and install electrical routing, including 7 systems furniture whips to support 26 new workstations, 2 recessed duplex receptacles for 5 non-systems workstations, and 2 UPS-fed duplex receptacles for printers. The communications scope includes removing old copper and fiber cabling, running 52 shielded CAT6A drops and 52 OM4 multi-mode fiber runs, installing an under-floor zone box, and routing two OM4 fiber trunk cables to Comm Room 267. The contractor will terminate and patch all cabling into the new patch panels in Comm Room 267; final patching of drops to the base network switches will be performed by the Government. Work must be completed in close coordination with the furniture assembly schedule. Please see attached Furniture Drawing and Statement of Work for specific quantities, dimensions, and full service requirements. Federal Supply Class (FSC): 5975 (Electrical Hardware and Supplies) NAICS Code: 238210 (Electrical Contractors and Other Wiring Installation Contractors) The projected completion date for all delivery and installation activities is no later than 45 Days ARO. This procurement will be conducted using Simplified Acquisition Procedures (SAP) in accordance with RFO Part 12 for the acquisition of commercial products and services. The Government intends to award a firm-fixed-price contract to the responsible offeror whose quote represents the best value to the Government. The anticipated award date is 14 August 2026 . One or more of the items under this acquisition is subject to Free Trade Agreements. All responsible sources may submit a quotation, bid, or proposal, as appropriate, which will be considered by the agency. 7/22/2026 - Updated RFQ Rev1 include Site Visit Date, Submission RFQ Date, and added Wage Determination document.

AgencyDEPT OF DEFENSE
NAICS238210 · Electrical Contractors
PlaceMt Zion, IL
SAM.gov· Posted Jul 22, 2026#FA440726Q0008
ContractTotal Small Business Set-Aside (FAR 19.5)1 day left

Tainter Gates Sandblasting

The International Boundary and Water Commission, United States and Mexico, United States Section (USIBWC) intends to issue a solicitation for the sandblasting and painting of eight (8) Tainter gates at the Amistad Dam located in Val Verde County, Texas. The project involves the rehabilitation of the radial gates, including surface preparation, sandblasting, and application of a new coating system to ensure the longevity and functionality of the gates. Scope of Work: The scope of work includes, but is not limited to, the following tasks: Testing for lead-based paint on the existing coatings. Complete removal of existing paint/coating from the eight radial gates. Surface preparation through sandblasting to achieve the required cleanliness and profile. Application of a new coating system as specified in the technical specifications. Replacement of radial gate anodes, side seals, bottom seals, and seal fasteners. Re-tensioning of gate cables and alignment of gates after seal replacement and re-lubrication. Compliance with all safety and environmental regulations, including the handling and disposal of hazardous materials. Project Duration: The project is expected to be completed within 365 days from the date of award. Site Visit: Contractors are highly encouraged to attend a site visit to provide potential bidders with an opportunity to inspect the worksite and existing conditions. Site visits may be schedule for Amistad Field Office, 670 Texas Spur 349, Del Rio, TX 78840 with the following CORs: Evelio Siller-Area Operations Manager evelio.siller@ibwc.gov 830-469-3440 915-315-0009 Juan Escobar – Powerplant Superintendent juan.escobar@ibwc.gov 830-469-3440 Demetrius Gaines-Assistant Area Operations Manager demetrius.gaines@ibwc.gov 830-469-3440 Virtual site visits (video/photographs) are not permitted. Site visits should be scheduled by the due date posted on form SF1442 Section "01-08 - Bid Instructions" The approximate Estimated Magnitude of this project is $1 Million to $5 Million. Contract Type: This is a 100% Small Business Set Aside. Only Offers from Small Businesses will be considered for this solicitation. The resulting contract will be a firm-fixed-price contract. NAICS Code: The North American Industry Classification System (NAICS) code for this project is 237990 - Other Heavy and Civil Engineering Construction with a corresponding small business standard of $45 Million. Active Unique Entity ID (UEI#) needs to be included in your offer. The government will award a contract resulting from this solicitation to the responsible Offeror based on technically acceptability, based on Contractor's Technical Approach, Expertise and Qualified Personnel to provide the services, Past Performance, and Management Approach will be evaluated. The Contractor shall provide all labor, material, equipment, subcontract, supervision, and management to perform the requirements of this Statement of Work (SOW). Technical Approach - Quote must demonstrate the technical approach by providing a narrative addressing all the items in the scope. The narrative shall at a minimum include your plan of action, equipment, key team members, and schedule. Past Performance – Quotes shall demonstrate successful past performance of at least 3 three (3) references for similar projects . The information shall include name of person, company, phone number, email address, and brief description of the project. Offerors shall meet or exceed and specifications and scope of work of items being quoted. Failure to submit required technical approach and past performance will deem a proposal non-responsive and no consideration for award will be given. INVOICE PROCESSING PLATFORM The U.S. Section International Boundary and Water Commission (USIBWC) has transitioned to an electronic invoicing system . The Invoice Processing Platform (IPP) is a secure, web-based system provided by the U.S. Department of the Treasury’s Bureau of the Fiscal Service in partnersh…

AgencyINTERNATIONAL BOUNDARY AND WATER COMMISSION: US-MEXICO
NAICS237990
PlaceDel Rio, TX
SAM.gov· Posted Jul 19, 2026#191BWC26B0001