ContractBeam
The Registry

Browse opportunities

engineering OR technicalStatus: incl. closedclear all
Contract3 days left

Ultrasonic Spray System

SECTION A U.S. Government ~ Tax Exempt Solicitation Information All quotes/responses shall be submitted via email to JaNae Lester at janae.a.lester.civ@us.navy.mil no later than Wednesday, August 5, 2026 @ 4:00 PM EST. Solicitation N0042126Q1305 is issued as an intent to sole source. The Government intends to purchase on a firm fixed-price basis, and to solicit and negotiate the proposed purchase order on a sole source basis with Spraying Systems Co for ultra sonic spray system , under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 13.106-1(b). This is a firm fixed-price procurement; therefore, the offeror’s intial offer should represent the vendor’s best quote in terms of price and technical acceptability. ***Basis for Award*** The Government intends to award this on a sole source basis. All interested parties MUST submit their capabilities and a quote no later than Wednesday, August 5th, 2026 @ 4:00 PM EST. The Government will make a decision to consider other offers. ***Instructions to Offerors*** Please include the following information with your response: FOB: Shipping Cost: Cage Code: Small Business – Yes ___ No __ Estimated Delivery Date: If available on a Pricelist please provide a copy. Government Point of Contact: JaNae Lester Naval Air Warfare Center AD (PAX) 21983 Bundy Road, BLDG 441 Patuxent River, MD 20670-1127 Email: janae.a.lester.civ@us.navy.mil

AgencyDEPT OF DEFENSE
NAICS333912
Place0, MD
SAM.gov· Posted Jul 30, 2026#N0042126Q1305
ContractNo Set aside used1 day left

Replacement UTVs Needed for the Mark Twain N.F. With Trade-Ins

The Government is seeking a Can-Am Defender HD11 or equivalent utility task vehicle. To establish an acceptable baseline for an "equivalent" submission, the Government will also accept quotes for the Polaris XD1500 North Star Edition or its equivalent. Salient Characteristics •Sealed Cab with HVAC to protect occupants from exterior elements such as smoke, insects, and harsh weather •Triple Cylinder Engine displacement of at least 999cc’s with at least 95HP •CVT transmission with electronic drive belt protection •Must have Electronic Power Steering •Drivetrain must have turf mode to protect sensitive areas and locking front differential for maximum traction in demanding conditions •Box capacity of 1000 lbs. for carrying fire apparatus •Cargo box at least 38”L x 54” W x 12” D •Ground clearance of at least 14” •At least 29” tires •Full coverage heavy duty HMW plastic skid plate • Towing capacity of 2500 lbs. from 2” receiver •Payload capacity of at least 1,200 lbs. •Ability to seat at least 3 personnel •At least 12” of suspension travel front and rear with arched A-arms for additional clearance. •Fuel capacity of at least 11.9 gallons •At least 4,500-pound winch •Full Windshield with wiper The contractor must accept three (3) used UTVs as trade-ins as a mandatory condition for this award. The vendor will apply the trade-in value as a credit to lower the final purchase price of the new Can-Am UTVs. EN8307 2020 Kawasaki Mule Pro FX LE VIN: JKBAFSC19LB517265 Hours: 590 / Mileage: 2959 EN1995 2016 Kubota RTV-X1120D Serial-A5KF1GDBPEG013450 138.2 Hours EN2034-907 2017 Kawasaki Mule Serial-JK1AFCM11JB525690 136.5 Hrs.

AgencyAGRICULTURE, DEPARTMENT OF
NAICS441227
PlaceRolla, MO
SAM.gov· Posted Jul 30, 2026#12444526Q0054
ContractNo Set aside used1 day left

STANDARDIZED ELECTRONIC MODULE

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 5963-01-575-9918 ITEM NAME: ELECTRONIC MODULE, STANDARDIZED OEM PN: 60173-370 MFG: DYNALEC CORP QTY: 10 EA DESCRIPTIVE/SPEC DATA: 250 WATT AMPLIFIER MODULE (A19-A24 ASSEMBLIES, 6 EACH). PART OF SHIPBOARD ANNOUNCING SYSTEM MUST BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10 AND MARKED IAW MIL-STD-129R. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR-CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. IF VENDORS CANNOT INDIVIDUALLY PACKAGE, PACK, MARK AND BAR-CODE AS REQUIRED, VENDORS MAY USE A THIRD PARTY TO PACKAGE ITEMS AS REQUIRED IF NECESSARY. PROVIDE ADDITIONAL COST WITH QUOTATION. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED WILL NOT BE RECIEVED BY THE WAREHOUSE AND WILL NOT BE ACCEPTABLE *****DO NOT SUBMIT QUOTE IF YOU CANNOT MEET THE PACKAGING REQUIREMENTS WITHIN THIS SOLICITATION. STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE - IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. ***** Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2025-05 (Oct 1, 2025) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for this solicitation is 334419 and the business size standard is 700. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. Award will be lowest price technically acceptable. The Coast Guard intends to award a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is August 3, 2026, at 10:00 am Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Sep 2023); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Oct 2025) with Alternate I, Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following F…

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS334419
SAM.gov· Posted Jul 29, 2026#70Z08026Q20897B00
Contract1 day left

TEMPERATURE TRANSMITTER

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 6685-12-342-3530 ITEM NAME: TRANSMITTER, TEMPERATURE, ELECT. OEM PN: 0501207230 MFG: ZAHNRADFABRIK FRIEDRICHSHAFEN AG QTY: 10 EA DESCRIPTIVE/SPEC DATA: SENSOR, TEMP. USED ON RED GEAR FOR THE 87 WPB VESSELS. MUST BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10 AND MARKED IAW MIL-STD-129R. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR-CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. IF VENDORS CANNOT INDIVIDUALLY PACKAGE, PACK, MARK AND BAR-CODE AS REQUIRED, VENDORS MAY USE A THIRD PARTY TO PACKAGE ITEMS AS REQUIRED IF NECESSARY. PROVIDE ADDITIONAL COST WITH QUOTATION. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED WILL NOT BE RECIEVED BY THE WAREHOUSE AND WILL NOT BE ACCEPTABLE *****DO NOT SUBMIT QUOTE IF YOU CANNOT MEET THE PACKAGING REQUIREMENTS WITHIN THIS SOLICITATION. STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE - IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. ***** Brand Name part is mandatory to be considered for award, offers of “equal” products must meet the salient physical, functional, or performance characteristic specified in this solicitation and USCG will determine if alternate part is acceptable. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2025-05 (Oct 1, 2025) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for this solicitation is 334513 and the business size standard is 700. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. Award will be lowest price technically acceptable. The Coast Guard intends to award a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is August 3, 2026, at 10:00 am Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Inst…

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS334513
PlaceCurtis Bay, MD
SAM.gov· Posted Jul 29, 2026#70Z08026Q20896B00
ContractSmall Business Set Aside - Total2 days left

Amendment 0001Rental of Two (2) Nitrogen Trailer {PNSV)

*****PLEASE NOTE**** Combined Synopsis N3904026Q5068A0001 Replaces Combined Synopsis N3904026Q5068 Requirement Title: Requirement Title: Portsmouth Naval Shipyard (PNSY) is seeking to rent a temporary high-pressure nitrogen gas tube trailer. The Statement of Work (SOW) outlines the specifications that meet the essential requirements for the procurement of rental equipment necessary to perform High-Pressure Nitrogen Flasks Charging Operations. The application for this equipment is located at Portsmouth Naval Shipyard in Kittery, ME. Solicitation Number: N3904026Q5068 A001 Response Deadline: August 04, 2026, at 12:30 PM ET POC: Bob Watters, robert.n.watters.civ@us.navy.mil Required Delivery Date/Period of Performance: Base year: 9/4/2026 - 9/2/2027 Option Year 1: 9/3/2027 - 8/31/2028 Option year 2: 9/1/2028 - 8/30/2029 Option year 3: 8/31/2029 - 2/28/2030 Place of Performance: Portsmouth Naval Shipyard Kittery, ME PNSY METHOD OF PROPOSAL SUBMISSION: Offers shall be emailed. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM): Vendors must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. All quotes shall include the embedded Request for Quote (RFQ). All quotes must have the highlighted sections completed. Please make sure to include all technical data sheets and information relating to the rental equipment.

AgencyDEPT OF DEFENSE
NAICS336611
PlaceME
SAM.gov· Posted Jul 29, 2026#N3904026Q5068A001
ContractSmall Business Set Aside - Total3 days left

CNC 5 Axis Gantry Mill

Combined Synopsis/Solicitation W911N2-26-Q-DR03 Amendment 0005 The purpose of this amendment is to: (1) Update the Purchase Description to REV 2, (2) Update Addendum to FAR clause 52.212-2, (3) Add additional provisions and clauses as seen elsewhere, (4) Provide pictures of the “pit” or area where the machine is to be placed, and (5) Extend the closing date to 05 August 2026 at 5:00 P.M. Eastern Time. ____________________________________________________________ Amendment 0004 The purpose of this amendment is to: (1) Update the Purchase Description to REV 1, (2) Extend the closing date to 31 July 2026 at 5:00 PM Eastern Time. _______________________________________________________________ Amendment 0003 The purpose of this amendment is to further clarify the Government’s answers on Attachment 11 and to add the following to Answer 21. A21. Approximate pit dimensions are 51 feet L x 23 feet W x 10 feet deep is the pit with a 7 inch concrete curb. It is a concrete wall and floor that is epoxy painted with ¾” stone compacted even with surface of shop floor. The closing date remains the same. ____________________________________________________________________ Amendment 0002 The purpose of this amendment is to: (1)To answer questions received from prospective quoters. See Attachment 11 entitled Questions and Answers. _____________________________________________________________________ Amendment 0001 The purpose of this amendment is to: (1) Extend the closing date to 22 May 2026 at 1200 Eastern Time to allow time to answer questions received from prospective quoters, (2) Change the anticipated award date in the original posting to 30 June 2026, and (3) Add FAR Clause 52.222-90 IAW recent policy change. ________________________________________________________________________ General Information This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number W911N2-26-Q-DR03 is issued as a Request for Quotation (RFQ) for quantity one (1) each Computer Numerically Controlled (CNC) 5 Axis Gantry Mill in accordance with the attached purchase description. This acquisition is set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The Product Service Code (PSC) assigned to this acquisition is 3417 – Milling Machine. The North American Industry Classification System (NAICS) code for this acquisition is 333517 - Machine Tool Manufacturing. This procurement will utilize the solicitation procedures at FAR 12.201-1(c)(1). This announcement combines the presolicitation notice and the RFQ according to 12.202(b). The anticipated award date of this requirement is 28 August 2026. CLIN Description Quantity Unit of Measure Price 0001 CNC 5 Axis Gantry mill IAW PD REV 1 1 Lot 0002 CDRLS The Contractor shall prepare and deliver the data identified in DD 1423, Contract Data Requirements Lists (CDRLs) A001 - A008. 1 Lot Not Separately Priced (NSP) The attached Purchase Description (PD) REV 2 establishes the minimum requirements for the purchase of one (1) CNC 5 Axis Gantry Mill to be delivered and installed at Letterkenny Army Depot (LEAD). The contractor shall provide all professional architectural, engineering and construction services for the preparation of all necessary drawings, specifications, calculations, cost estimates and related design, fabrication, construction, installation and testing services for the completion of this project. The gantry mill shall be installed turnkey in accordance with Original Equipment Manufacturer specification and standards. See attached Synopsis/Solicitation Notes for specifics for site visit date and time. Delivery & Accep…

AgencyDEPT OF DEFENSE
NAICS333517
PlaceChambersburg, PA
SAM.gov· Posted Jul 28, 2026#W911N226QDR03
ContractSmall Business Set Aside - Total1 day left

Homeland Security Cutter - Light Icebreaker (HSC-L) Solicitation

The United States Coast Guard (USCG) is issuing Request for Proposals (RFP) No. 70Z02326R93280004 for the Homeland Security Cutter - Light Icebreaker (HSC-L) acquisition. The Government intends to award an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for the design, production, testing, delivery, and related supplies and services for HSC-L vessels in accordance with the solicitation. This solicitation uses a two-phase advisory down-select process. Phase 1 proposals are due by the date and time stated in this notice and the solicitation. Following Phase 1 evaluations, the Government intends to issue advisory down-select notices to offerors in accordance with Section L of the solicitation. Phase 2 proposal due dates will be included in a subsequent solicitation amendment. Offerors shall review and comply with all requirements, instructions, terms, conditions, provisions, clauses, and attachments included in the solicitation. The complete solicitation, including the SF-33, Sections B through M, and all applicable attachments, is provided below under the Attachments/Links section of this notice. All questions and proposal submissions shall be made in accordance with the instructions provided in the solicitation. -------------------------------- Amendment A00001 -------------------------------- Amendment A00001 is issued to extend the Phase 1 proposal submission deadline, provide the Government’s responses to solicitation questions, revise Sections L and M to clarify that the General Arrangement Drawing will be provided as part of Phase 2 with the Contract Design package and is not provided with the Phase 1 Design Placemat, revise Attachment J-2, Design and Readiness Review Requirements and Criteria, and revise Section I, FAR 52.211-11, Liquidated Damages-Supplies, Services, or Research and Development. Phase 1 proposals are now due no later than 12:00 PM U.S. Eastern Time on July 20, 2026. Except as expressly modified by Amendment A00001, all other terms and conditions remain unchanged. Offerors are responsible for reviewing Amendment A00001 and all associated attachments in their entirety and shall acknowledge receipt of the amendment in accordance with the solicitation instructions. -------------------------------- Amendment A00002 -------------------------------- Amendment A00002 is issued to provide the Government’s responses to additional solicitation questions; revise Section C.2.3(e) to correct the typographical error “foreign contactors” to read “foreign contractors”; revise Section M.2.1 and the applicable Factor 1 confidence rating definitions to clarify the evaluation of in-house and subcontracted or teaming-partner design and engineering resources; provide clarification regarding the meaning of concurrent production; revise Sections L.11 and M.2.2 to update the Phase 1 due-date references used for determining recent past performance from July 14, 2026, to July 20, 2026, consistent with Amendment A00001; and issue a conformed solicitation incorporating Amendments A00001 and A00002. The clarification regarding concurrent production is provided through the Government’s response to the applicable solicitation question. Sections L and M are not revised in connection with that clarification. The Phase 1 proposal submission deadline remains unchanged. Phase 1 proposals are due no later than 12:00 PM U.S. Eastern Time on July 20, 2026 . Except as expressly modified by Amendment A00002, all other terms and conditions remain unchanged. Offerors are responsible for reviewing Amendment A00002 and all associated attachments in their entirety and shall acknowledge receipt of the amendment in accordance with the solicitation instructions. -------------------------------- Amendment A00003 -------------------------------- The U.S. Coast Guard hereby issues Amendment A00003 to RFP No. 70Z02326R93280004 for the Homeland Security Cutter – Light Icebreaker (HSC-L) acquisition. Ame…

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS336611
SAM.gov· Posted Jul 28, 2026#70Z02326R93280004