ContractBeam
The Registry

Browse opportunities

consulting OR management OR supportSource: SAM.govclear all
ContractSmall Business Set Aside - Total2 days left

2d MarDiv CUAS ADFOR Support

Solicitation Number / RFQ Number:M6700126QM011 Subject: Counter-UAS (CUAS) Adversary Force (ADFOR) Support This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in FAR 12.202(b)(1), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This procurement is Small Business Set Aside under NAICS 541990 code size standard of $19,500,000.00. A Quoter’s submission of a quote does not constitute a contract or authorize work to begin. This document is not legally binding and does not commit the US Government in any way. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01 and Defense Federal Acquisition Regulations Supplement Publication Notice (DPN) 20251110 . In accordance with FAR 12.001(a), when a policy in another part is inconsistent with FAR Part 12, Part 12 shall take precedence. 52.212-2 Evaluation-Commercial Products and Commercial Services (Nov 2021) Basis for Award: The Government intends to award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to Government, price and other factors considered. The following factors shall be used to evaluate quotes: Price Technical Capability Price Reasonableness : Will be conducted in accordance with FAR 12.204(a). The total quoted price, to include shipping costs, will be used in the price evaluation. A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful quoter within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the quoter's specified expiration time, the Government may accept a quote (or part of a quote), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. See attached Performance Work Statement. ***ONLY OPEN MARKET PRICING WILL BE CONSIDERED*** Addendum to 52.212-1 Instructions to Offerors. The Government reserves the right to make an award solely on initial quotes received. Quoters must submit their response to this RFQ via email to lucas.a.beltran.mil@usmc.mil and david.r.bovee.mil@usmc.mil no later than the posted closing date in this listing. Questions will be accepted via email up to four (4) calendar days after the posting of the RFQ. No phone questions will be accepted. The deadline is necessary to ensure timely award and the Government may, in its sole discretion, choose not to respond to questions received after the deadline. Questions will be reviewed and addressed via an amendment to the solicitation and/or posting of the Questions and Answer(s) (Q&A) document. Quotes must contain all requested line items as the contract award will be made in aggregate. Therefore, any quote received without all line items priced will be considered non-responsive. Quoters are instructed to completely fill out the section (Quoter’s Information) below and return it along with your quote. Quotes should be valid for 90 days unless stated otherwise in the quote.

AgencyDEPT OF DEFENSE
NAICS541990
PlaceCamp Lejeune, NC
SAM.gov· Posted Aug 1, 2026#M6700126
ContractSmall Business Set Aside - Total4 days left

TOOL BOXES

14 EACH OF THE FOLLOWING ITEMS: 1. Kennedy K1800 Series 15-Drawer Roller Cabinet (Model #315XB)? Dimensions: 39-3/8 in. W x 18 in. D x 39 in. H ? Storage Capacity: 13,381 cubic inches (Net weight: 230 lbs) ? Heavy-Duty Construction: Heavy 18-gauge steel outer cabinet body paired with 20-gauge steel drawer bodies ? Ball-Bearing Drawer Slides: Full-extension ball-bearing drawer slides supporting up to 120 lbs per drawer ? Drawer Configuration (Dual-Bank Layout):? Left Bank (6 drawers): Five 23 in. W x 16-1/2 in. D x 1-5/8 in. H drawers; Three 23 in. W x 16-1/2 in. D x 3-5/8 in. H drawers; One 23 in. W x 16-1/2 in. D x 5-5/8 in. H drawer ? Right Bank (6 drawers): Two 9-1/2 in. W x 16-1/2 in. D x 1-5/8 in. H drawers; Three 9-1/2 in. W x 16-1/2 in. D x 3-5/8 in. H drawers; One 9-1/2 in. W x 16-1/2 in. D x 11-5/8 in. H drawer ? Mobility and Security: Features 5 in. x 2 in. roller bearing casters (2 rigid, 2 swivel with brakes, 350 lb capacity per caster) , a heavy-duty tubular side handle, and a high-security tubular lock with keys.? Exterior Finish: Brown wrinkle powder-coat paint finish 2. Kennedy 13-Drawer, 2-Piece Machinists Combo (Chest #52611 and Base #5150)This configuration combines the classic 11-drawer machinists chest with a 2-drawer matching base.A. 11-Drawer Machinists Chest (Model #52611)? Dimensions: 26-3/4 in. W x 8-1/2 in. D x 18 in. H (Net weight: 47 lbs).? Storage Capacity: 3,000 cubic inches ? Felt-Lined Interior: Wool felt-lined drawers and top till designed specifically to cushion, protect, and absorb moisture from delicate machining tools ? Hardware: Vinyl-cushioned steel-core top handle , drawbolt latches, and front drop-front panel (25.563 in. x 12.859 in.) that slides down to secure the drawers when closed ? Steel Build: Durable 20-gauge steel body with 22-gauge drawers B. 2-Drawer Machinists Chest Base (Model #5150)? Dimensions: 26-3/4 in. W x 12-1/2 in. D x 9-1/2 in. H (Net weight: 28 lbs).? Storage Capacity: 1,200 cubic inches.? Friction Drawer Slides: Two-piece welded friction drawer slides supporting up to 60 lbs per drawer.? Drawer Configuration: One top drawer (24-1/8 in. W x 10-7/8 in. D x 2 in. H) and one bottom drawer (25-1/8 in. W x 10-7/8 in. D x 4-1/8 in. H).? Felt Protection: Includes a wool felt-lined top drawer.? System Integration: Features stacking clips to anchor and bridge the top chest down to roller cabinets.3. Kennedy Cabinet Side Shelf (Part #5150-06596159 / DS1 Series)? Dimensions: 20-1/2 in. W x 17-1/4 in. D.? Material and Finish: Heavy-duty steel matching the signature Kennedy brown wrinkle finish ? Design and Functionality: Works as a fold-away extension shelf that mounts directly to the side of roller cabinets to provide additional staging workspace without permanently expanding the toolbox footprint.

AgencyDEPT OF DEFENSE
NAICS332439
SAM.gov· Posted Jul 30, 2026#W911S226U3873
ContractSmall Business Set Aside - Total1 day left

HOSE ASSEMBLY, NONMETALLIC NSN: 4720-01-270-5801

COMMERCIAL PRODUCTS OR SERVICES FAR 13.5 SIMPLIFIED PROCEDURES FOR CERTAIN COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES 100% TOTAL SMALL BUSINESS SET-ASIDE SOLICITATION INFORMATION Solicitation Number: [Insert Solicitation Number, e.g., N50054-26-Q-0003 Document Type: Combined Synopsis / Solicitation (Request for Quote - RFQ) FAR Circular Reference: Federal Acquisition Circular (FAC) 2025-01, Effective January 2025 Set-Aside Status: 100% Total Small Business Set-Aside (Restricted to small business concerns only) Description of Requirement This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. NOTICE OF SET-ASIDE: This procurement is 100% Set-Aside for Small Business concerns. Offers received from concerns that are not registered active Small Business concerns under NAICS 326220 in the System for Award Management (SAM) at the time of quote submission shall be considered non-responsive and will not be evaluated for award. This solicitation is issued as a Request for Quote (RFQ) to establish a Firm-Fixed-Price (FFP) Purchase Order for the supply of nonmetallic hose assemblies specified below. SECTION B: SUPPLIES OR SERVICES AND PRICES/COSTS CLIN 0001: Nonmetallic Hose Assembly The Contractor shall supply nonmetallic hose assemblies conforming to National Stock Number (NSN) 4720-01-270-5801 in accordance with Section C. CLIN: 0001 NSN: 4720-01-270-5801 Description: HOSE ASSEMBLY, NONMETALLIC Quantity: 12 Unit of Issue: EA Proposed Unit Price: $ _________________ Proposed Total Price: $ _________________ SECTION C: DESCRIPTION / SPECIFICATIONS / WORK STATEMENT The contractor shall deliver nonmetallic hose assemblies conforming strictly to National Stock Number (NSN) 4720-01-270-5801. All technical and engineering specifications are established by the standard requirements of the NSN. No alternate products are acceptable. SECTION D: PACKAGING AND MARKING 1. Packaging Requirements Unit Container Level: E8 (Standard commercial box/container) Military Packaging Standard: Packaging and marking shall be in accordance with MIL-STD-129. Each unit container must be clearly marked with the NSN, CAGE code, Part Number, Contract/Purchase Order Number, and Manufacturer's Name. SECTION E: INSPECTION AND ACCEPTANCE Inspection: Destination (Standard for commercial items) Acceptance: Destination by SUPSHIP Representative / Quality Assurance Representative (QAR) SECTION F: DELIVERIES OR PERFORMANCE FOB Point: Destination Shipping Address: GENERAL DYNAMICS NASSCO 8511 KERNS ST., DOCK 5 SAN DIEGO, CA 92154 SECTION I: CONTRACT CLAUSES The following FAR and DFARS clauses apply to this acquisition and are incorporated by reference (or full text where indicated). Offerors can view clauses in full text at www.acquisition.gov. FAR Clauses Incorporated by Reference: FAR 52.212-4 – Contract Terms and Conditions-Commercial Products and Commercial Services (Nov 2023) FAR 52.204-13 – System for Award Management Maintenance (Oct 2018) FAR 52.204-18 – Commercial and Government Entity Code Maintenance (Aug 2020) FAR 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors (Nov 2021) FAR Clauses Incorporated in Full Text: FAR 52.212-5 – Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Jan 2025) (The following clauses within 52.212-5 are selected as applicable): 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Nov 2021) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2…

AgencyDEPT OF DEFENSE
NAICS326220
PlaceCA
SAM.gov· Posted Jul 28, 2026#N6278626Q0003
ContractTotal Small Business Set-Aside (FAR 19.5)2 days left

Amendment 1 - RFP for Janitorial Services--Bothell, Washington

Amendment 1 : Amendment 1 is to share that wage determination 2015-5535 was included with the previous contract. This is a Request for Proposal for janitorial services at the Federal Emergency Management Agency (FEMA) buidling in Bothell, Washington. The work described in the Statement of Work provides for management, supervision, labor, transportation, supplies, material, equipment, required to perform the Janitorial Services and miscellaneous utility work effectively, economically, and satisfactorily at the FEMA Bothell Facility. Please see the attached documents for details about the requirement. Email the Contracting Officer listed with questions. Proposals are due 08/04/2026 by 5:00 PM ET. Below are some questions with answers that were asked on previous acquisitions: Q1 : Can you provide a breakdown of the flooring types and their approximate size, to be able to quote the semi-annual floor work? A1: The Task Chart shows the approximate square footage of each area. The areas that need mopped are bathrooms, kitchen, stairway tunnel, and the Logistics office area. The majority of the areas are paneled carpet pieces. The mopped floors are linoleum style and bathrooms are like a stone type tile. Q2: Regarding consumables, can you provide a monthly estimate of the number & type of cases / cartridges / boxes of each consumable? A2: The consumables are a little bit harder to determine. Normally, the site has approximately 47 people using the facilities in a 24 hour period. Currently, the site has 26 people so they are going through almost half of what they should be going through and they don’t know when they will be have 47 people again. The site utilizes 8” rolls of paper towels. The rolls are 600 feet long and we have dispensers in all three bathrooms and the kitchen. They also use Purell ES4 Antibacterial Foaming Soap Refills because they have the dispenser for that type. They currently use two sizes of trash bags. The small size is actually too small but they will finish out what they have in stock. The other is a large (55-60 gallon) 2.5 mil black bag. The requirement for toilet paper is mainly a minimum of 2 ply, standard roles. They do not utilize the large rolls. They also purchase Pine-Sol, Simple Green and bleach from time to time. When they purchased their last order of supplies, they still had a large personnel footprint. Right after, they lost about 14 people so they still have some of everything. Q3 : Could you clarify the timeline for fund disbursement to the awardee once the contract is executed? Are there particular milestones or conditions that must be fulfilled before the funds are released? Additionally, for option years, "Can you explain how the contract addresses option years? Are there provisions for extending the contract beyond the initial term, and if so, what criteria must be met to exercise those options? A3: Payment will be made when you submit an invoice. You may submit an invoice monthly. As long as you are providing services in accordance with the contract, payment will be made. The first payment will be made after an invoice is submitted after the first month of services. No payment will be made prior to services rendered. There are no option years on this contract and will be competed again after 12 months.

AgencyHOMELAND SECURITY, DEPARTMENT OF
NAICS561720 · Janitorial Services
PlaceBothell, WA
SAM.gov· Posted Jul 22, 2026#2258
ContractNo Set aside used1 day left

Supply Chain Threat Intelligence & Remediation Software Platform

This is a Notice of Proposed Contract Action under RFO Part 12 Acquisition of Commercial Products and Commercial Services. This notice is for information only; a solicitation will not be issued. THIS IS NOT A REQUEST FOR QUOTATION. No contract will be awarded on the basis of offers received in response to this notice. The associated North American Industry Classification System (NAICS) code is 513210 (Software Publishers) with a small business size standard of $47,000,000 in average annual revenue. The Government requires procurement of a Supply Chain Threat Intelligence & Remediation software platform that will be capable of ingesting Software Bills of Materials (SBOMs) and performing deep dependency analysis for any software application type. This software tool will provide the Government with a threat intelligence platform and software supply chain threat remediation capability. The license structure will include a base year and 1 option year. The Government intends to negotiate a sole-source contract for this requirement with Unison Solutions, Inc. 4235 Tejon St, Denver, CO 80211. Sole distributor of the Warpstone Technologies Supply Chain Threat Intelligence & Remediation software platform. The Warpstone software tool is available from only one responsible source and no other type of supplies or services will satisfy agency requirements. Warpstone is the only company taking a wholistic look at software supply chain risk management without a container focus. Warpstone’s novel tracking system for vulnerabilities that will enable actionable insights which improve security posture and accelerate Zero Trust capabilities. Warpstone's product will expand capabilities from only being able to assess containers to more types of artifacts. Including software binaries, libraries, software components, and containers. Additionally, the tool is remediation focused, meaning that instead of making a static risk assessment, it allows the Government to manage risk throughout an entire enterprise. Further, Warpstone is the only known commercial platform offering a non-proprietary access code. This is a notice of proposed contract action and not a request for competitive quotes; however, all responsible sources may submit a capability statement or quote, which shall be considered by the agency. All inquiries should be sent by email to the POCs listed in this notice. Responses must be submitted by the date/time listed on the notice. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government in future procurements. Responses received will be evaluated. However, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. The Government anticipates an award date on or before 31 August 2026.

AgencyDEPT OF DEFENSE
NAICS513210
PlaceRome, NY
SAM.gov· Posted Jul 18, 2026#FA875126QWARP
ContractTotal Small Business Set-Aside (FAR 19.5)1 day left

FCC HAZELTON, FY27 Intercity Transportation Fee Services (Greyhound)

The Federal Bureau of Prisons, Federal Correctional Complex, Hazelton, West Virginia, intends to issue a single award under Solicitation 15B12126Q00000026, for the requirements of Ground Transportation, Greyhound ticketing, for inmates releasing from FCC Hazelton under NAICS 485510. The Period of Performance will be October 1, 2026 through September 30, 2027. This solicitation is 100% Small Business Set Aside in which pricing will be provided FOB Destination (1640 Skyview Drive, Bruceton Mills, WV 26525). The contract type is firm-fixed price and the Government hereby reserves the right upon award to make formal single award. The Government will award to the responsible offeror whose offer, conforming to the solicitation herein, will be considered to be the most advantageous to the Government, with past performance and price considered (prices being rated higher than past performance). The solicitation will be made available on SAM.gov, where all future information pertaining to the acquisition, including solicitation amendments, will also be distributed through the foregoing website. Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. Payment will be made per 52.232-33 – Payment by Electronic Funds Transfer [EFT]—System for Award Management (31 U.S.C. 3332). Each offer is required per 52.204-7 to complete their representations and certifications such as System for Award Management [SAM]. An active and valid UEI with no exclusions is required to be eligible for award. Faith-Based and Community Based Organizations (AUG 2005) Included. A signed SF 1449 with vendor information is required to be submitted in order to be a viable quote/bid. The point of contact for this solicitation is Andrea Burke, Contract Specialist, Ax2Burke@bop.gov. (Please email only) Offers must be submitted via e-mail to Ax2burke@bop.gov and CC HAX-BusinessOffice-S@bop.gov . The anticipated award date is 8/10/2026 (SUBJECT TO CHANGE).

AgencyJUSTICE, DEPARTMENT OF
NAICS485510
PlaceBruceton Mills, WV
SAM.gov· Posted Jul 7, 2026#15B12126Q00000026
Contract1 day left

81--SHIPPING AND STORAG

CONTACT INFORMATION|4|APAC.41|YGR|445-737-3493|makayla.hauser@dla.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|x|||||||| STOP-WORK ORDER (AUG 1989)|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report (combo).||TBD|SPRPA1|TBD|TBD|See schedule|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|robyn.grinarml@dla.mil| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1|| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026)|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| ONLY ONE OFFER (DEVIATION 2026-O0048)(MAR 2026)|1|| THIS ITEM REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. IF YOU HAVE NOT MANUFACTURED THIS ITEM BEFORE FOR DLA WEAPONS SUPPORT PHILADELPHIA AND WANT TO BECOME AN APPROVED SOURCE OF SUPPLY, PLEASE CONTACT THE BUYER BY EMAIL TO INQUIRE ABOUT SOURCE APPROVAL REQUEST PROCEDURES. FOR ALL DRAWING REQUESTS, PLEASE CONTACT THE BUYER BY EMAIL. \ 1. SCOPE 1.1 PRE-AWARD / POST AWARD REQUIREMENTS: Due to the critical use of this item and its quality history, a pre-award survey and post-award conference may be required for all new manufacturers. For all previous sources, a post-award conference may be recommended. 1.2 Container shell material is ;ALUMINUM; . 1.3 When discrepancies exist between these requirements and those on current manufacturer's drawings,contact code ;N241.12; or code N241.10 1.4 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;Container Research Corporation; drawing number ( ;05259; ) ;761E001; , Revision ;latest; and all details and specifications referenced therein. 1.5 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.6 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS DRAWING DATA=DL761E001 |05259| | |C| | | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A| 1| | 3. REQUIREMENTS 3.1 One third (1/3) unit of desiccant (MIL-D-3464, Type II nondusting) per cubic foot of container interior volume shall be placed in desiccant holder of each container at time of shipment. 3.2 Reference to Cadmium plating shall be deleted and the following substituted: "Finish shall be electrodeposited alkaline Zinc-Nickel Alloy in accordance with ASTM B 841 Class 1, Type B, Grade 3." 3.3 The shock mount listed in the drawing package (whether identified as sole source, recommended, or suggested) has been tested and approved for the shock mitigation system of t…

AgencyDEPT OF DEFENSE
NAICS332439
SAM.gov· Posted Jul 2, 2026#SPRPA126RVC13